A compliance template creates an inspection frequency for a standard you follow, such as LOLER or PUWER. Frequencies made from a template are suggested for every item you add, so you can apply them in one tap.

The compliance templates

TemplateStandardInspection typeEvery
LOLERLifting Operations and Lifting Equipment RegulationsThorough6 months
PPE MonthlyPersonal Protective Equipment monthly checkRegular1 month
IRATAIndustrial Rope Access Trade AssociationThorough6 months
SPRATSociety of Professional Rope Access TechniciansThorough6 months
PUWERProvision and Use of Work Equipment RegulationsThorough6 months
WAHRWork at Height RegulationsThorough6 months

A template fills in the name, type and interval for you. You can change any of them before you save. Once saved, it is an ordinary inspection frequency that you can edit or remove like any other.

Admins and Managers can create inspection frequencies, from a template or from scratch.

Choosing your standards when you set up Scannable

When you create a new organisation, Scannable asks you to ‘Set your compliance standards’.

  1. Select each standard you follow. You can pick more than one
  2. To add your own frequency as well, select ‘+ Inspection frequency’ and fill in the details
  3. Select ‘Save and continue’

Each standard you pick becomes a suggested inspection frequency. Select ‘Skip’ if you'd rather set frequencies up later.

Using a template when you create a frequency

You can use a template at any time when you create an inspection frequency.

In the Scannable web app

  1. Go to the Inspection frequencies tab in Inspections
  2. Select ‘+ Inspection frequency’
  3. Next to ‘Use a compliance template’, select ‘Show templates’, then pick a template
  4. Check the details, then select ‘Create’

In the Scannable mobile app

  1. Tap the ‘Me’ tab, then tap ‘Inspection frequencies’
  2. Tap ‘+’ in the top right corner
  3. Tap ‘Use a compliance template’ and pick a template
  4. Check the details, then tap ‘Create’

Suggested inspection frequencies

A suggested frequency is offered for every new item you add to your inventory. Frequencies made from a template are suggested by default.

To make any frequency suggested, tick ‘Automatically suggest this frequency for all items added to inventory’ when you create or edit it. Untick it to stop suggesting it. The ‘Automatically suggested’ column in the list of frequencies shows which ones are on.

You can have as many suggested frequencies as you like. Each one is offered for every item, whatever its product or category.

Applying suggested frequencies in one tap

After you add items, a ‘Set inspection frequency’ card shows your suggested frequencies. One suggested frequency shows its name, type and interval, for example ‘LOLER | Thorough | 6 monthly’.

In the Scannable mobile app

This shows after you add one item or many, under ‘What's next?’.

  1. Tap ‘Apply frequency’ or ‘Apply frequencies’ to add all your suggested frequencies to the items you just added
  2. To choose which ones to apply instead, tap ‘View & change’

If you have no suggested frequencies, the button reads ‘Select frequency’ and lets you pick from all your frequencies.

In the Scannable web app

This shows after you add a single item, under ‘Item added!’.

  1. Select ‘Apply frequency’ or ‘Apply frequencies’ to add all your suggested frequencies to the item
  2. To choose which ones to apply instead, select the ‘Set inspection frequency’ card

With no suggested frequencies, select the card to pick from all your frequencies.

Admins, Managers and Members can apply inspection frequencies to items.