When you add equipment to your inventory, the first step is usually identifying the product. Once the product is selected, your items are created using the product’s information.

Product vs item

  • Product

    A make/model/variant of equipment.

    Example: “Beal Access - 10.5mm 100m Orange”

  • Item

    A physical piece of equipment you own, usually with its own serial number. Many items can share the same product.

    Example: “Petzl Vertex Vent – Serial #18C0123456”


  1. Tap ‘Add items’
  2. Use the search bar to search for the product
  3. Tap the product to select it
  4. Tap ‘Add multiple items of this product’
  5. Tap ‘Scan’
  6. Scan or type the Serial Number into the Serial Number box
  7. The item will automatically add to your list and open the NFC reader
  8. Hold the NFC tag against your phone’s NFC sweet spot
  9. Continue steps 5-8 above until you have entered every item you wish to add
  10. Close the Camera
  11. Tap ‘Add to Inventory’

Add multiple items with serial only (no NFC)

  1. Tap ‘Add Items’
  2. Use the search bar to search for the product
  3. Tap the product to select it
  4. Tap ‘Add Multiple Items of this Product’
  5. Tap the serial number box to type the serial number, or tap ‘Scan’ to use the camera to scan a 2D code
  6. Tap Add to List
  7. Continue until you have entered every item you wish to add
  8. Tap ‘Add to Inventory’

Add multiple items with NFC only (no serial)

  1. Tap ‘Add Items’
  2. Use the search bar to search for the product
  3. Tap the product to select it
  4. Tap ‘Add Multiple Items of this Product’
  5. Tap ‘+ NFC’
  6. Close the camera
  7. Tap Add to List

Add multiple items by typing the serial then linking NFC

  1. Tap ‘Add items’
  2. Use the search bar to search for the product
  3. Tap the product to select it
  4. Tap ‘Add multiple items of this product’
  5. Tap the serial number box to type the serial number
  6. Tap ‘+NFC’
  7. Hold the NFC tag against your phone’s NFC sweet spot
  8. Continue until you have entered every item you wish to add
  9. Tap ‘Add to Inventory’

Reviewing and editing items you have added during multi-add

After adding via multi-add, Scannable keeps a temporary list of recently added items.

  1. Tap the list icon in the upper-right corner. This shows all items you have just added

  2. Tap ‘Options’

  3. Select the action you wish to perform and complete the action:

    inspect, set inspection frequency, update information, assign team, assign labels, move to folder, remove inspection frequency, or remove label