To record an inspection result on a singular item with the mobile app
- Search for the item you want to record an inspection result against
- Select the item and tap ‘Options’ > ‘Inspect’
- Complete the fields, selecting a checklist if relevant, adding any comments, photos or PDF’s needed, and the thorough examination job reference and safe working load if completing a thorough examination for the item
- Tap ‘Complete inspection’
To record inspection results on many items with the mobile app
- Open Multi-scan by clicking on the symbol in the upper right-hand corner of the app
- Use NFC or the 2D codes on your equipment to build a list of items you wish to record inspection results against
- Tap ‘Options’ > ‘Inspect’
- Complete the fields, selecting a checklist if relevant, adding any comments, photos or PDFs needed; and the thorough examination job reference and safe working load if completing a thorough examination for the item
- Tap ‘Complete inspection’
- You can view historic inspection results in your item’s ‘History’ tab
To record an inspection result on a singular item with the web app
- In the Inventory section of the Scannable web app, search for the item you want to record an inspection result against
- Click on the three dots on the right hand side of the screen, and select ‘Inspect’
- Complete the fields, selecting a checklist if relevant, adding any comments, photos or PDF’s needed, and the thorough examination job reference and safe working load if completing a thorough examination for the item
- Tap ‘Complete inspection’
To record inspection results on many items with the web app
- Head to the Multi-scan area of your Scannable dashboard
- Use NFC (you will need a USB NFC Reader) or search to build a list of the items you wish to record inspection results against
- Click on the drop down box on the bottom left of the screen, and select ‘Inspect’
- Complete the fields, selecting a checklist if relevant, adding any comments, photos or PDFs needed, and the thorough examination job reference and safe working load if completing a thorough examination for the item
- Tap ‘Complete X Inspections’
Inspection results and safety status
Each inspection has one result. The result sets the item's safety status.
| Result | When to use it | Safety status |
|---|---|---|
| Pass | The item is fit for use. | Safe |
| Monitor | The item is fit for use, but has wear to watch next time. | Safe |
| Quarantine | The item needs repair before anyone uses it again. | Not safe |
| Fail | The item must be taken out of use. | Not safe |
A result only sets the status while nothing more serious applies. An item that is recalled, expired or overdue for inspection stays Not safe whatever the result.
With a checklist
When you use a checklist, you mark each step Pass, Monitor, Repair, Fail or NA. Scannable then sets the inspection result from the steps:
- Any step marked Fail makes the result Fail.
- Otherwise, any step marked Repair makes the result Quarantine.
- Otherwise, any step marked Monitor makes the result Monitor.
- If every step is Pass or NA, the result is Pass.
Safe working load from a thorough examination
When a competent person records a thorough examination, they pick its job reference and enter the safe working load. The field starts with the item's current safe working load.
When you complete the inspection, Scannable saves that value as the item's safe working load. It shows in the item's details and in inventory reports. See Recording thorough examinations.